Ceramic Cutting Tools
Our company developed GT series
composite ceramic
silicon nitride cutting tools. They exhibit good
tensile, toughness, high wear resistance,
hot-hardness, thermal shock resistance and impact
resistance and other properties. They are suitable
for machining those materials which are very difficult
to be machined with cemented carbide inserts such as
machining medium and high-hardness alloyed cast iron
rolls. GT series ceramic tools show 3-34 times cutting
efficiency of cemented carbide. And they can machining
high-hardness cast iron such as Cr26(HRC 60-61),
Cr15Mo3(HRC 60-64) that cemented carbide inserts and
aluminum ceramic inserts can not. GT series new
composite ceramic inserts can machining smoothly with
the speed of 80 m/min and 50 m/min respectively with the
condition of depth of cut 5-6 mm, feed 0.1-0.8 mm/r.
Spare Parts For Electricity Power Generation Industries:
Thousand
kinds of spare parts for electricity power generation
factory are manufactured in our corporation including
the parts for the many kinds of the coal grinding
equipment such as high-speed, mid-speed and low-speed
coal grinding machine.
These parts are as follows:
The grinding ring and grinding ball for the E-type the
coal grinding miller
The grinding roller and grinding tray for the MPS coal
grinding miller
The grinding roller and liner for the RP coal grinding
miller
The port cover, screwy tube and impacting bar for the
cylindrical coal grinding miller
The impacting bar, impacting wheel and its trays for the
fan coal grinding miller
The all kinds of pipes used in the abrasive wear and
high te
mperature
surrounding.
The corporation possesses many kinds of advanced
equipments for casing, metal forming, heat treatment and
assemble and also owns the all ready test and analysis
devices and advanced test methods.
The large size Y-type pipe branch produced by our
corporation severs in the Shanxi Shengtou electricity
power generation factory. It is testified that this kind
of pipe branch has many advantages such as high
strength, good erosion resistance and welding ability.
This product receives many praises by users.
Ceramal Compound Steel Pipe:
Ceramal
compound steel pipe is a new composite pipe made by the
method of SHS, which has reached the international
advanced level in 90’s, and listed in the important
industrialized projects in state high-technology ?63?
plan of China.
This product consists of three parts from inside to outside:
ceramic layer, intermediate layer and steel pipe. Under
the condition of 2000 ℃ high temperature, uniform and
compact layer (AL2O3 Ceramal) is formed and firmly
joined with the steel pipe through the intermediate
layer. The high-hardness(HV1300), antiriotcharacter of
ceramic layer combined with the high-malleability of
steel makes its performance excellent, such as high
abrasion resistance, corrosion resistance,
high-temperature endurance and impact proof. Compared
with other material of pipe, it has the characters of
long service life, lightweight, lower engineering cost
and easy to installation.
We can manufacture ceramic compound straight pipe, elbow, T-branch
pipe and flange etc.
Product usage:
Because of the high wearability of the ceramic layer, the
ceramal compound steel pipe can replace other
wear-resisting pipes, such as cast iron pipe, cast stone
pipe, rubber inner lined pipe. And can be widely used in
mineral beneficiating, tailing refilling in mines; coal
powder transporting, coal ash and cinder removing in
thermal power plants; coal blasting, coke transporting
in smeteries; clinker transporting in cement plant, etc.
Secondly, ceramal compound steel pipe has very strong thermal and
cold shock proof and certain corrosion-resisting
character, so can be also used in the fields of chemical
industry, petroleum industry and geothermal power
industry.
Product Performance:
Wear-resisting
Ceramic layer hardness can reach HV1300, which is
equivalent to tungsten-cobalt hard alloy and more than
ten times harder than steel. So ceramic compound steel
pipe is suitable to transport abrasive mediums.
Corrosion-resisting
Ceramic layer can bear acid, base and electrochemistry
corrosion. Its acidproof level can be higher than 98%.
So ceramal compound steel pipe is suitable to transport
corrosion mediums.
Lower running resistance
Its resistance coefficient is lower than steel’s.
Good Performance –cost-ratio
Service life:
Steel pipe: Cast stone pipe: Ceramal steel pipe=1:5:10
Periodic cost:
Steel pipe: Cast stone pipe: Ceramal steel pipe=7:5:2
Thermal Shock Proof
Can be chronically used in the temperature ranging from
-50℃ to 900℃.
Easy To Install
Can be connected by welding, flange, fast-joint, etc.
The rolling technology
modification and the series of guide board:
Our company have the professional productions of the
guide board, and mainly engaged in the design and
modification the rolling process and equipment of the
high-speed wire mill and the bar mill. We also provide
the series guide board of MORGANG、HOLLTECK、DANIELI and
ite assembly parts. In addition we supply the technology
services as follows:
According to the existing equipment of every factory, we
can make the two-syncopated rolling of
φ12、φ14、φ16、φ18、φ20 and the three-syncopated rolling of
φ8、φ10、φ12、φ14.
1.
The two and three-syncopated hole design and the
calculate of rolling parameters to various
specifications.
2. The two and three-syncopated design of the assorted
hole of the roller with various specifications.
3. The design and facture of crystal reamers and their
templets of two and three-syncopated rolling mills and
the rolling hole templets with various specifications.
4. The two and three-syncopated guide board design to
various specifications.
5. The design and facture of test bars of the guide
board corresponding to the two and three-syncopated
rolling specifications.
6. The usage longevity of the roller and the guide
board.
7. The alteration, design and facture of the live cover.
8. The design and facture of the guide cannulation and
the guide groove.
9. The rolling debug on spot and the service of trained
technology.
Consumers | Name of the product | Remark |
Tangshan Iron and Steel limited Co. | Bar rolling factory | 09 series of guide board and the spare part; the series of two-syncopated guide board; | DANIELI |
the series of three-syncopated guide board; the series of four-syncopated guide board; | ASHLOW |
Wire rolling factory | The spare part of the guide board, e,g. guide roller and the wearable plank, etc. | MORGAN |
Bar rolling factory of Dayawan Baoxing Iron and Steel Co. | 09 series of guide board and the spare part; the series of RT-ICS two-syncopated guide board; | DANIELI, HOLLTECK |
The continuous rolling factory of Chengde Iron and Steel Co. | The series of RE guide board and the spare part; the series of RT-ICS two-syncopated guide board; | HOLLTECK |
Shuicheng Iron and Steel Co. | Bar rolling factory | The series of RE guide board and the spare part; the series of RT-ICS two-syncopated guide board; | HOLLTECK |
Wire rolling factory | Guide roller and the spare part; |
Ban rolling factory, Nanchang Iron and Steel Co. | The series of RE guide board and the spare part; the series of RT-ICS two-syncopated guide board; | HOLLTECK |
Xinyu Iron and Steel Co. | Bar rolling factory | the series of 09 guide board | DANIELI |
Wire rolling factory | The spare part of the guide board, e,g. guide roller and the wearable plank, etc. | MORGAN |
Wire rolling factory, Panzhihua Iron and Steel | The spare part of the guide board, e,g. guide roller and the wearable plank, etc. | MORGAN |
Sha Iron and Steel Co. | Bar rolling factory | The series of RE guide board and the spare part; the series of RT-ICS two-syncopated guide board; the series of RT-ICS three-syncopated guide board; | HOLLTECK |
Wire rolling factory | The spare part of the guide board, e,g. guide roller and the wearable plank, etc | MORGAN |
The first mini rolling factory of Qindao Iron and Steel Co. | The guide board and its spare part | HOLLTECK |
